Pro Carbon Construction: Bi-Ply window, Warp Carbon panels. The Warp Carbon reinforced Technora X-ply provides foundational profile stability in the shape design ofthe sail plus excellent durability.

Extra control and range in wide ranging conditions, the all new Banzai Max Pro is the 5 batten wave sail. 5 Battens bring increased stability overall and higher top end speeds.

Handling characteristic: The lift is positioned slightly higher up and centered compared to the Banzai 11 Pro and Banzai Surf Pro which promotes a more upright but neutral feel. This gives a great drive and low end power but also great control in the high end.

Main window panel – 6 mil Bi-PLY from Dimension Polyant features two 3 mil layers of PET film. This creates a softer hand, improved flex and reduced creasing.  The UV inhibitors in the adhesive significantly increases the UV life of the product in comparison to a traditional monofilm.

Construction details:

• Upper color body panels – 1.5 mil Ultra low stretch linear Warp Carbon fiber laminate yarns arrayed to control load lines in the sail combined with super strong Technora aramid x-ply.    Warp Carbon gives incredible linear control of the sail profile while also allowing a dynamic, torsional, bias stretch and return. This makes the sails feel very quiet, weightless and very resistant to being overpowered.
• Foot, tack and center luff panel – 2 mil Warp Carbon film combined with super strong Technora aramid x-ply yarns for increased puncture resistance.  Warp Carbon is extremely strong and stretch resistant, allowing the sail to hold it’s designed shape for a long long time. Using  2 pass lamination for super strength and uniform UV resistance preventing sunlight from passing through so one side is always in the shade.   The 2.0 mil foot Warp Carbon has double the carbon frequency as the 1.5 mil body Warp Carbon. 
• Welded Seams - Welded Seam technology reduces build weight and increases strength on film to film seams. 
• Double stitching – Around the main window.
• Dacron Leech edge reinforcement.
• Folded rear/cut edge on mast sleeve to prevent fraying.